DJI Zenmuse L3 LiDAR Payload

Press Buy Now — Place Order on this page, choose delivery and a FedEx speed, then pay online on Stripe's secure checkout by card (a 3.5% card processing fee applies) or by bank (ACH, no fee) — or choose an invoice and pay by bank wire or ACH after you receive it with the unit's serial number. All sales are final. Please call, text or email us before you pay — we'll confirm the unit and answer any questions. Call or text +1-347-998-1464, email info@thefuture3d.com, or use the inquiry form on this page — we typically respond within a few business hours.

Yes — we welcome and recommend in-person inspection at our Miami HQ (500 NW 2nd Ave #16894, Miami, FL 33101). Contact us to schedule.

We ship only within the contiguous (mainland) United States — not to Alaska, Hawaii, Puerto Rico or other US territories, military (APO/FPO/DPO) or international addresses. Pickup in Miami is available. Shipping is by FedEx: the order page calculates it for your address and the speed you choose — FedEx Ground (or Home Delivery to a home), Express Saver or 2Day — and pickup at our Miami office carries no shipping charge.

The price listed is our asking price. Serious offers are welcome — use the "Your offer" field in the inquiry form on this page, or reach out by email or phone.

Brand New (Open Box): activated in February 2026, never flown or used — not a factory-sealed unit. Warranty timing depends on the activation date; ask us for details. Because the packaging has been opened, it is not sold as a new, factory-sealed item. Please call, text or email us before you pay — we'll confirm the unit and answer any questions. Call or text +1-347-998-1464 or email info@thefuture3d.com.

DJI publishes no US price for the Zenmuse L3, so the reference is what dealers charge. On October 20, 2026 most US dealers we checked listed a new L3 at $17,400, and the lowest established US dealer we found was Wellbots at $13,999. Those are prices for new, factory-sealed units. This listing is $13,750 for a Brand New (Open Box) L3 — activated in February 2026, never flown or used — cut from $13,999 on October 20, 2026.

Yes. On October 20, 2026 this listing went from $13,999 to $13,750 — a $249 price cut. It is the same Brand New (Open Box) Zenmuse L3 payload — activated in February 2026, never flown.

Because it is not a new, sealed unit and we are not a dealer. THE FUTURE 3D is a working drone and LiDAR operator, this L3 is surplus from our own fleet, and we cut its price on October 20, 2026 to move it. It is Brand New (Open Box): it was activated in February 2026 but has never been flown or used. What you give up versus a dealer is a factory-sealed unit and the dealer relationship — all sales are final, and warranty timing depends on the activation date, so ask us about it before you buy. What you get is a never-flown L3 at $13,750 (on October 20, 2026 most US dealers we checked charged $17,400 for a new, sealed unit, and the lowest established dealer we found charged $13,999), with the serial number available to you before payment and inspection welcome at our Miami office.

DJI’s spec sheet (enterprise.dji.com/zenmuse-l3/specs) gives point-cloud system accuracy of 3 cm vertical and 4 cm horizontal (RMSE) at 120 m flight altitude, and 5 cm vertical and 7.5 cm horizontal (RMSE) at 300 m. DJI measured those figures in its own test field — Matrice 400 linked to a position-calibrated D-RTK 3 station, 15 m/s linear-scan flights, hard-ground checkpoints and DJI Terra post-processing — so accuracy on a real project depends on its conditions.

The L3 is a generational leap over the L2. L3 delivers 1535 nm long-range LiDAR up to 950 m at 10% reflectivity (vs L2 around 250–500 m), dual 100MP RGB mapping cameras (vs L2 single 20MP), and is exclusive to the M400 (L2 was compatible with M300/M350). For new corridor + power line + large-area LiDAR work, L3 is the upgrade.

No. The Zenmuse L3 is M400-exclusive. The L3 uses a dedicated single-gimbal connector engineered for the M400 platform and is not backward compatible.

DJI publishes no daily-coverage figure for the L3. Coverage is set by mission planning — flight altitude, swath width, required point density, RTK availability, and weather — not by the sensor alone.

Established US dealers selling the L3 include DSLRPros, B&H, DroneNerds, and Adorama. THE FUTURE 3D is offering this Brand New (Open Box) unit (activated in February 2026, never flown) directly to buyers in the contiguous (mainland) US. We ship within the mainland US only; inspection welcome at our Miami HQ.

On October 20, 2026 most US dealers we checked (Global Drone HQ, Drone Nerds, E38 and others) quoted $17,400 for a new L3; Infinit Drones $17,350; Advexure — on DJI’s published US Enterprise dealer roster as of September 10, 2026 — $17,200; Drone Deer Recovery $15,499; and Wellbots $13,999, the lowest established dealer we found. Those are prices for new, factory-sealed units. This listing is $13,750 for a Brand New (Open Box) L3 — lower than every new, factory-sealed L3 we found at those dealers, though only by $249. It was activated in February 2026 but has never been flown or used, so it is not a factory-sealed unit, and warranty timing depends on the activation date — ask us about it before you buy. We do not claim it is the cheapest anywhere: an unverified online seller with no published address listed a new L3 at $12,126. DJI publishes no US price for the L3 at all, so every figure here is a seller price, not a manufacturer list. Prices move weekly; check them yourself before buying.

We don't rent — we sell, and we run aerial LiDAR as a service. When available, the Zenmuse L3 rents for roughly $500–$750/day from US and Canadian drone-rental houses (e.g., DroneLabs). At $13,750 for this never-flown unit, about 18–28 rental-days covers the purchase — after that, ownership is pure savings, and the L3 is a newly released, M400-exclusive payload. If you only need the deliverable, we can fly your project with our own M400 + L3.

Yes — that is exactly what this listing is. The Zenmuse L3 is a standalone, M400-exclusive payload, so if you already fly an M400 you only need the sensor, not another aircraft. It mounts on the M400 single-gimbal connector and works with DJI Pilot 2, DJI Terra, DJI Modify, FlightHub 2, and D-RTK 3. This payload-only listing is what makes it different from our M400 + Zenmuse L3 bundle — the bundle pairs the same L3 with the Brand New (Open Box), never-flown M400 aircraft, a brand-new TB100 battery, and the charging station for operators who do not yet own an M400.