Retail & Shopping Center 3D Scanning

Retail and shopping center scanning is priced at $0.20-$0.70 per square foot with a commercial minimum of $3,000. Single stores typically fall in the $0.35-$0.60/sqft range depending on size and complexity. Full shopping center documentation at 200,000+ sqft trends toward $0.20-$0.35/sqft due to the efficiency of open floor plans. Multi-location portfolio programs qualify for volume pricing. Contact THE FUTURE 3D for a project-specific quote.

Yes. Mobile SLAM scanning is non-disruptive — the operator walks through spaces at a normal pace with no tripods, cables, or barriers. For occupied stores, we can scan common areas and corridors during business hours and individual stores during off-hours or between leases. For vacant spaces, scanning happens any time access is available. We work with your property management team to create a scanning schedule that minimizes disruption to tenants and shoppers.

Yes. THE FUTURE 3D serves all 50 US states and can coordinate multi-location scanning programs across any number of sites. Mobile SLAM scanning speed makes portfolio-wide documentation economically viable — we can scan multiple stores per day in a market, then move to the next market on a coordinated schedule. Each location receives the same deliverable set and data format, enabling consistent portfolio-wide analysis.

Square footage calculations are derived from the point cloud data using industry-standard measurement methods (BOMA or ANSI/SIOR as applicable). The point cloud captures actual wall positions, column locations, and demising wall placements — providing measurements based on real conditions rather than design intent. This verified data is particularly valuable for lease audits, rent reconciliation, and CAM allocation disputes.

Tenant architects receive registered point clouds in E57 and RCP formats, high-resolution panoramic imagery, and NavVis IVION digital twin access. These deliverables provide the precise as-built conditions needed for tenant fit-out design: column positions, ceiling heights, utility stub locations, fire suppression layout, and structural conditions. The data is ready for import into Revit, AutoCAD, or any BIM/CAD platform. From there, the architect or a BIM modeling firm creates the design model.

Yes. The point cloud captures visible MEP systems including overhead HVAC ductwork, sprinkler piping, electrical conduit runs, and lighting layouts. For detailed mechanical room documentation, we use the handheld NavVis MLX to access confined spaces. This systems data is critical for renovation planning, new tenant utility connections, and energy efficiency upgrade design.

The NavVis VLX 3 captures 200,000-300,000 sqft per day. A typical community shopping center of 200,000-400,000 sqft can be scanned in 1-2 days. A regional mall of 500,000-1,000,000 sqft typically requires 3-5 days of field scanning. Processing and deliverable preparation takes 3-5 business days after field work is complete.

Yes. The panoramic imagery and NavVis IVION digital twin provide visual tools that leasing teams can share with prospective tenants for remote site evaluation. Tenants can explore available spaces from their office, take measurements, and evaluate the space before scheduling a physical visit. This accelerates the leasing cycle and expands the pool of prospective tenants who can evaluate the space without travel.